Aujourd'hui je vais vous présenter un retour d'expérience sur le passage en Stretch d'une 2ième JeedomSmart.
J'ai donc refais ce que j'avais déjà fais une fois.
Voici le contenu du fichier install.log copié sur la clé USB par le Recovery :
Code : Tout sélectionner
==== PREPARE CARD ====
65536+0 records in
65536+0 records out
33554432 bytes (34 MB, 32 MiB) copied, 2.94446 s, 11.4 MB/s
/dev/mmcblk0: msdos partitions
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Device does not contain a recognized partition table.
Created a new DOS disklabel with disk identifier 0x3b6195f2.
Command (m for help): Created a new DOS disklabel with disk identifier 0xbf7cc0b7.
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
/dev/mmcblk0: msdos partitions
131072+0 records in
131072+0 records out
67108864 bytes (67 MB, 64 MiB) copied, 6.19864 s, 10.8 MB/s
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): Partition number (1-4, default 1): First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (65536-15269887, default 15269887):
Created a new partition 1 of type 'Linux' and of size 256 MiB.
Command (m for help): Selected partition 1
Partition type (type L to list all types): Changed type of partition 'Linux' to 'W95 FAT32 (LBA)'.
Command (m for help): Partition type
p primary (1 primary, 0 extended, 3 free)
e extended (container for logical partitions)
Select (default p): Partition number (2-4, default 2): First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (589824-15269887, default 15269887):
Created a new partition 2 of type 'Linux' and of size 8 MiB.
Command (m for help): Partition type
p primary (2 primary, 0 extended, 2 free)
e extended (container for logical partitions)
Select (default p): Partition number (3,4, default 3): First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (606208-15269887, default 15269887):
Created a new partition 3 of type 'Linux' and of size 8 MiB.
Command (m for help): Partition type
p primary (3 primary, 0 extended, 1 free)
e extended (container for logical partitions)
Select (default e):
Selected partition 4
First sector (2048-15269887, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (622592-15269887, default 15269887):
Created a new partition 4 of type 'Extended' and of size 7 GiB.
Command (m for help): All primary partitions are in use.
Adding logical partition 5
First sector (624640-15269887, default 624640): Last sector, +sectors or +size{K,M,G,T,P} (624640-15269887, default 15269887):
Created a new partition 5 of type 'Linux' and of size 8 MiB.
Command (m for help): All primary partitions are in use.
Adding logical partition 6
First sector (643072-15269887, default 643072): Last sector, +sectors or +size{K,M,G,T,P} (643072-15269887, default 15269887):
Created a new partition 6 of type 'Linux' and of size 256 MiB.
Command (m for help): All primary partitions are in use.
Adding logical partition 7
First sector (1169408-15269887, default 1169408): Last sector, +sectors or +size{K,M,G,T,P} (1169408-15269887, default 15269887):
Created a new partition 7 of type 'Linux' and of size 6.7 GiB.
Command (m for help): The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
/dev/mmcblk0: msdos partitions 1 2 3 4 <5 6 7>
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.098694 s, 10.6 MB/s
mkfs.fat: warning - lowercase labels might not work properly with DOS or Windows
mkfs.fat 3.0.28 (2015-05-16)
2048+0 records in
2048+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.090738 s, 11.6 MB/s
mke2fs 1.42.13 (17-May-2015)
Discarding device blocks: 4096/1755136 528384/1755136 done
Creating filesystem with 1755136 4k blocks and 438912 inodes
Filesystem UUID: e84c23ee-e3b1-493f-b48f-42a5966a255b
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Allocating group tables: 0/54 done
Writing inode tables: 0/54 done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: 0/54 done
/dev/mmcblk0: msdos partitions 1 2 3 4 <5 6 7>
==== INSTALL BOOT ====
442+0 records in
442+0 records out
442 bytes copied, 0.002318 s, 191 kB/s
96+0 records in
96+0 records out
49152 bytes (49 kB, 48 KiB) copied, 0.005525 s, 8.9 MB/s
1184+0 records in
1184+0 records out
606208 bytes (606 kB, 592 KiB) copied, 0.058243 s, 10.4 MB/s
==== INSTALL JEEDOM ====
mkdir: can't create directory '/mnt1': File exists
mkdir: can't create directory '/mnt2': File exists
umount: can't umount /mnt2: Invalid argument
umount: can't umount /mnt1: Invalid argument
Number of files: 80,612 (reg: 66,759, dir: 9,455, link: 4,392, dev: 6)
Number of created files: 80,610 (reg: 66,759, dir: 9,453, link: 4,392, dev: 6)
Number of deleted files: 0
Number of regular files transferred: 66,746
Total file size: 2,659,320,396 bytes
Total transferred file size: 2,652,751,836 bytes
Literal data: 2,652,751,836 bytes
Matched data: 0 bytes
File list size: 2,162,463
File list generation time: 0.001 seconds
File list transfer time: 0.000 seconds
Total bytes sent: 2,658,187,968
Total bytes received: 1,337,101
sent 2,658,187,968 bytes received 1,337,101 bytes 22,828,541.36 bytes/sec
total size is 2,659,320,396 speedup is 1.00
==== PREPARE JEEDOM BOOT ====
mkdir: can't create directory '/mnt2/media/boot': File exists
umount: can't umount /mnt1: Invalid argument
==== INSTALL MULTIBOOT SUPPORT ====
umount: can't umount /mnt2: Invalid argument
mkdir: can't create directory '/mnt2/multiboot': File exists
Pour quelques équipements qui avaient été inclus en mode sécurisé, dans la santé Z-Wave, le groupes est "NOK"
Dans la configuration du module, onglet "Résumé", il est indiqué que le contrôleur n'est inclus dans aucun groupe du module.
Dans l'onglet "Association", le groupe Lifeline est vide. Nous allons cliquer le bouton "Rafraîchir infos du noeud" pour que le contrôleur réapparaisse dans le groupe Lifeline, et dans santé Z-wave, l'équipement passe de groupes "NOK" à "OK" et le cadenas vert se ferme. et enfin sauvegarder.
Voila j'espère que ce retour d’expérience sera utile aux membres Jeedom.
