Avant toute chose merci de (re)prendre connaissance de la charte et de la respecter.
Pour résumer :
- Avant de poser une question, je cherche si la réponse existe
- Je suis poli, courtois et je respecte tout un chacun sur le forum
- Si un post m'agace : je m'en éloigne plutôt que de répondre d'une façon qui pourrait être mal interprétée


Il n'est jamais du luxe que de rappeler des choses simples :
Courtoisie, amabilité, politesse et bonne humeur sont les maîtres mots pour un forum sympathique, bienveillant et accueillant :)

Le groupe des Helpers est present pour vous aidez, n'hésitez pas à poser des questions ;)

Toute la communauté vous remercie

/!\ L’ancien forum passera en lecture seule en janvier 2020 (Si community a bien pris le relais) puis nous le fermerons définitivement en janvier 2021./!\
Merci de vous rendre sur https://community.jeedom.com maintenant pour vos prochains postes ;)

Plugin SMS

Avatar de l’utilisateur
noBru77
Timide
Messages : 359
Inscription : 11 oct. 2016, 00:41

Re: Plugin SMS

Message par noBru77 » 30 mai 2017, 13:58

Bonjour,

J'ai moi aussi galéré pour faire marcher les SMS de façon fiable. J'ai acheté 3 clés et testé tout ce qui était possible. J'ai testé tous les opérateurs. J'ai enfin réussi à obtenir une installation fiable, et depuis plusieurs semaines/mois, plus un crash. Voici ma recette :
- clé Huawei e180 (achat eBay 10€)
- mode modem
- réseau Free Mobile avec la Freebox à proximité et Femtocel activé (module à commander chez Free) avec réception 30/30.
- décoché l'option SMS max 120 caractères dans la page de config du Plugin.

Depuis ça marche impec.

Bruno.


Envoyé de mon iPhone en utilisant Tapatalk

Avatar de l’utilisateur
Sylar
Timide
Messages : 499
Inscription : 02 mars 2016, 09:34
Contact :

Re: Plugin SMS

Message par Sylar » 31 mai 2017, 21:16

Bonjour,

j'ai mon plugin SMS qui foire depuis plusieurs jours or avant rien tout fonctionnais parfaitement voici le log :
une idée ?

j'utilise cmm module Raspberry PI SIM800 GSM GPRS Add-On V2.0 Module Shield For RPI ( avec câble usb - série).
et sur cette page https://www.itead.cc/wiki/Download

il y a un os pour le module comment réalisé la mise à jours du firmware ?

merci


2017-05-31 19:55:17][INFO] : Starting new HTTP connection (1): 127.0.0.1
[2017-05-31 19:55:17][DEBUG] : "POST /plugins/sms/core/php/jeeSMS.php?apikey=*******
HTTP/1.1" 200 0
[2017-05-31 19:55:17][ERROR] : Exit 1 because this exeption is fatal
[2017-05-31 19:55:17][DEBUG] : Shutdown
[2017-05-31 19:55:17][DEBUG] : Removing PID file /tmp/smsd.pid
[2017-05-31 19:55:18][DEBUG] : LoopNetServer Thread stopped
[2017-05-31 19:55:18][DEBUG] : Exit 0
[2017-05-31 20:00:10][INFO] : Start smsd
[2017-05-31 20:00:10][INFO] : Log level : none
[2017-05-31 20:00:10][INFO] : Socket port : 55002
[2017-05-31 20:00:10][INFO] : Socket host : 127.0.0.1
[2017-05-31 20:00:10][INFO] : PID file : /tmp/smsd.pid
[2017-05-31 20:00:10][INFO] : Device : /dev/ttyUSB0
[2017-05-31 20:00:10][INFO] : Apikey : *************
[2017-05-31 20:00:10][INFO] : Callback : http://127.0.0.1:80/plugins/sms/core/php/jeeSMS.php
[2017-05-31 20:00:10][INFO] : Cycle : 5.0
[2017-05-31 20:00:10][INFO] : Serial rate : 115200
[2017-05-31 20:00:10][INFO] : Pin : None
[2017-05-31 20:00:10][INFO] : Text mode : yes
[2017-05-31 20:00:10][INFO] : SMSC : None
[2017-05-31 20:00:10][DEBUG] : Writing PID 17613 to /tmp/smsd.pid
[2017-05-31 20:00:10][DEBUG] : Init request module v2.4.3
[2017-05-31 20:00:10][INFO] : Starting new HTTP connection (1): 127.0.0.1
[2017-05-31 20:00:10][DEBUG] : "GET /plugins/sms/core/php/jeeSMS.php?apikey=y*********
HTTP/1.1" 200 0
[2017-05-31 20:00:10][DEBUG] : Socket interface started
[2017-05-31 20:00:10][DEBUG] : LoopNetServer Thread started
[2017-05-31 20:00:10][DEBUG] : Start listening...
[2017-05-31 20:00:10][DEBUG] : Listening on: [127.0.0.1:55002]
[2017-05-31 20:00:10][DEBUG] : Connecting to GSM Modem...
[2017-05-31 20:00:10][DEBUG] : Text mode true
[2017-05-31 20:00:10][INFO] : Connecting to modem on port /dev/ttyUSB0 at 115200bps
[2017-05-31 20:00:10][DEBUG] : write: ATZ
[2017-05-31 20:00:20][ERROR] : Exception: Timeout
[2017-05-31 20:00:20][DEBUG] : Send to jeedom : {'message': 'Timeout', 'number': 'none'}

Avatar de l’utilisateur
m4x91
Timide
Messages : 410
Inscription : 22 mai 2015, 08:39

Re: Plugin SMS

Message par m4x91 » 01 juin 2017, 18:29

Comme moi...

Didier3L
Actif
Messages : 1345
Inscription : 01 mai 2016, 13:40

Re: Plugin SMS

Message par Didier3L » 02 juin 2017, 16:28

noBru77 a écrit :
30 mai 2017, 13:58
Bonjour,

J'ai moi aussi galéré pour faire marcher les SMS de façon fiable. J'ai acheté 3 clés et testé tout ce qui était possible. J'ai testé tous les opérateurs. J'ai enfin réussi à obtenir une installation fiable, et depuis plusieurs semaines/mois, plus un crash. Voici ma recette :
- clé Huawei e180 (achat eBay 10€)
- mode modem
- réseau Free Mobile avec la Freebox à proximité et Femtocel activé (module à commander chez Free) avec réception 30/30.
- décoché l'option SMS max 120 caractères dans la page de config du Plugin.

Depuis ça marche impec.
- mode modem
Comment fais tu :?:
Synology DS216+ / DSM 6.2 / Docker / MariaDB 5
Conteneur : jeedom/Jeedom:master en mode réseau Host
Protocole : MyHOME Play Zigbee/ Xiaomi Aqara / HomeBridge / BLEA

Mon matériel | Tuto MyHOME en Vidéo | Documentation

Didier3L
Actif
Messages : 1345
Inscription : 01 mai 2016, 13:40

Re: Plugin SMS

Message par Didier3L » 02 juin 2017, 16:37

Moi aussi, depuis quelques semaines problème et plus de sms :evil:

Code : Tout sélectionner

[2017-06-02 14:32:27][DEBUG] : Client connected to [127.0.0.1:33956]
[2017-06-02 14:32:27][DEBUG] : Message read from socket: {"apikey":"xxxxxxxxxxxx","number":"+336xxxxxxxx","message":"Allo"}
[2017-06-02 14:32:27][DEBUG] : Client disconnected from [127.0.0.1:33956]
[2017-06-02 14:32:28][DEBUG] : write: AT+CREG?
[2017-06-02 14:32:28][DEBUG] : response: ['+CREG: 0,1', 'OK']
[2017-06-02 14:32:29][DEBUG] : write: AT+CSQ
[2017-06-02 14:32:29][DEBUG] : response: ['+CSQ: 10,99', 'OK']
[2017-06-02 14:32:29][DEBUG] : write: AT+CMGL=0
[2017-06-02 14:32:29][DEBUG] : response: ['OK']
[2017-06-02 14:32:29][DEBUG] : write: AT+CSQ
[2017-06-02 14:32:29][DEBUG] : response: ['+CSQ: 10,99', 'OK']
[2017-06-02 14:32:29][DEBUG] : Message received in socket JEEDOM_SOCKET_MESSAGE
[2017-06-02 14:32:29][DEBUG] : write: AT+CREG?
[2017-06-02 14:32:29][DEBUG] : response: ['+CREG: 0,1', 'OK']
[2017-06-02 14:32:30][DEBUG] : write: AT+CSQ
[2017-06-02 14:32:30][DEBUG] : response: ['+CSQ: 10,99', 'OK']
[2017-06-02 14:32:30][DEBUG] : write: AT+CMGS=17
[2017-06-02 14:32:30][DEBUG] : response: ['> ']
[2017-06-02 14:32:30][DEBUG] : response: ['+CMS ERROR: 330']
[2017-06-02 14:32:30][ERROR] : CMS 330 (SMSC number not set)
Dernière édition par Didier3L le 05 juin 2017, 18:03, édité 1 fois.
Synology DS216+ / DSM 6.2 / Docker / MariaDB 5
Conteneur : jeedom/Jeedom:master en mode réseau Host
Protocole : MyHOME Play Zigbee/ Xiaomi Aqara / HomeBridge / BLEA

Mon matériel | Tuto MyHOME en Vidéo | Documentation

Didier3L
Actif
Messages : 1345
Inscription : 01 mai 2016, 13:40

Re: Plugin SMS

Message par Didier3L » 02 juin 2017, 18:20

est il normal que apikey des logs soit différent de apikey Jeedom :?:

Code : Tout sélectionner

Message read from socket: {"apikey":
Synology DS216+ / DSM 6.2 / Docker / MariaDB 5
Conteneur : jeedom/Jeedom:master en mode réseau Host
Protocole : MyHOME Play Zigbee/ Xiaomi Aqara / HomeBridge / BLEA

Mon matériel | Tuto MyHOME en Vidéo | Documentation

Avatar de l’utilisateur
noBru77
Timide
Messages : 359
Inscription : 11 oct. 2016, 00:41

Re: Plugin SMS

Message par noBru77 » 03 juin 2017, 08:36

Didier3L a écrit :
noBru77 a écrit :
30 mai 2017, 13:58
Bonjour,

J'ai moi aussi galéré pour faire marcher les SMS de façon fiable. J'ai acheté 3 clés et testé tout ce qui était possible. J'ai testé tous les opérateurs. J'ai enfin réussi à obtenir une installation fiable, et depuis plusieurs semaines/mois, plus un crash. Voici ma recette :
- clé Huawei e180 (achat eBay 10€)
- mode modem
- réseau Free Mobile avec la Freebox à proximité et Femtocel activé (module à commander chez Free) avec réception 30/30.
- décoché l'option SMS max 120 caractères dans la page de config du Plugin.

Depuis ça marche impec.
- mode modem
Comment fais tu :?:
Le passage en mode modem est indiqué dans la Doc du Plugin.


Envoyé de mon iPhone en utilisant Tapatalk

Didier3L
Actif
Messages : 1345
Inscription : 01 mai 2016, 13:40

Re: Plugin SMS

Message par Didier3L » 03 juin 2017, 12:27

J'ai réglé mon problème en saisissant le numéro de la passerelle dans le plugin
Passerelle SMS / SMS Gateway (modifer cas d'erreur : CMS 330 SMSC number not set)
Pour Free il faut mettre : +33695000695

https://mobile.free.fr/assistance/167.html
Synology DS216+ / DSM 6.2 / Docker / MariaDB 5
Conteneur : jeedom/Jeedom:master en mode réseau Host
Protocole : MyHOME Play Zigbee/ Xiaomi Aqara / HomeBridge / BLEA

Mon matériel | Tuto MyHOME en Vidéo | Documentation

Avatar de l’utilisateur
Sylar
Timide
Messages : 499
Inscription : 02 mars 2016, 09:34
Contact :

Re: Plugin SMS

Message par Sylar » 05 juin 2017, 09:57

Sylar a écrit :
31 mai 2017, 21:16
Bonjour,

j'ai mon plugin SMS qui foire depuis plusieurs jours or avant rien tout fonctionnais parfaitement voici le log :
une idée ?

j'utilise cmm module Raspberry PI SIM800 GSM GPRS Add-On V2.0 Module Shield For RPI ( avec câble usb - série).
et sur cette page https://www.itead.cc/wiki/Download

il y a un os pour le module comment réalisé la mise à jours du firmware ?

merci


2017-05-31 19:55:17][INFO] : Starting new HTTP connection (1): 127.0.0.1
[2017-05-31 19:55:17][DEBUG] : "POST /plugins/sms/core/php/jeeSMS.php?apikey=*******
HTTP/1.1" 200 0
[2017-05-31 19:55:17][ERROR] : Exit 1 because this exeption is fatal
[2017-05-31 19:55:17][DEBUG] : Shutdown
[2017-05-31 19:55:17][DEBUG] : Removing PID file /tmp/smsd.pid
[2017-05-31 19:55:18][DEBUG] : LoopNetServer Thread stopped
[2017-05-31 19:55:18][DEBUG] : Exit 0
[2017-05-31 20:00:10][INFO] : Start smsd
[2017-05-31 20:00:10][INFO] : Log level : none
[2017-05-31 20:00:10][INFO] : Socket port : 55002
[2017-05-31 20:00:10][INFO] : Socket host : 127.0.0.1
[2017-05-31 20:00:10][INFO] : PID file : /tmp/smsd.pid
[2017-05-31 20:00:10][INFO] : Device : /dev/ttyUSB0
[2017-05-31 20:00:10][INFO] : Apikey : *************
[2017-05-31 20:00:10][INFO] : Callback : http://127.0.0.1:80/plugins/sms/core/php/jeeSMS.php
[2017-05-31 20:00:10][INFO] : Cycle : 5.0
[2017-05-31 20:00:10][INFO] : Serial rate : 115200
[2017-05-31 20:00:10][INFO] : Pin : None
[2017-05-31 20:00:10][INFO] : Text mode : yes
[2017-05-31 20:00:10][INFO] : SMSC : None
[2017-05-31 20:00:10][DEBUG] : Writing PID 17613 to /tmp/smsd.pid
[2017-05-31 20:00:10][DEBUG] : Init request module v2.4.3
[2017-05-31 20:00:10][INFO] : Starting new HTTP connection (1): 127.0.0.1
[2017-05-31 20:00:10][DEBUG] : "GET /plugins/sms/core/php/jeeSMS.php?apikey=y*********
HTTP/1.1" 200 0
[2017-05-31 20:00:10][DEBUG] : Socket interface started
[2017-05-31 20:00:10][DEBUG] : LoopNetServer Thread started
[2017-05-31 20:00:10][DEBUG] : Start listening...
[2017-05-31 20:00:10][DEBUG] : Listening on: [127.0.0.1:55002]
[2017-05-31 20:00:10][DEBUG] : Connecting to GSM Modem...
[2017-05-31 20:00:10][DEBUG] : Text mode true
[2017-05-31 20:00:10][INFO] : Connecting to modem on port /dev/ttyUSB0 at 115200bps
[2017-05-31 20:00:10][DEBUG] : write: ATZ
[2017-05-31 20:00:20][ERROR] : Exception: Timeout
[2017-05-31 20:00:20][DEBUG] : Send to jeedom : {'message': 'Timeout', 'number': 'none'}


Auto solution ,
j'ai simplement éteint le module Gsm et par la suite remis en marche cela semble fonctionné à nouveau ..;

Avatar de l’utilisateur
Sylar
Timide
Messages : 499
Inscription : 02 mars 2016, 09:34
Contact :

Re: Plugin SMS

Message par Sylar » 05 juin 2017, 09:59

je repose la question ,
il y a t'il une possibilité que lorsque l'ont reçoit un sms sur le plugin sms , de le transférer vers pushbullet ?

exemple : Jeedom reçois le message d'un numéro de Gsm , et le renvoi le contenu de se message via le plugin pushbullet..

merci

Avatar de l’utilisateur
guenneguez_t
Actif
Messages : 2389
Inscription : 17 oct. 2014, 09:07
Localisation : Seine Maritime

Re: Plugin SMS

Message par guenneguez_t » 06 juin 2017, 09:33

Hello

Perso, j'ai fait un système d'auto controle :
J'ai créé une interraction "test sms" qui modifie un viruel qui s'auto reset au bout de 10 minutes.
Mon scenario de controle :
Il s'envoie un sms avec comme contenu "test sms".
Il attend 15 secondes et contrôle que le virtuel est passé à 1. S'il est à 0, c'est que les SMS ne partent plus ou ne sont plus reçu. Donc dans ce cas un petit mail pour être informé.

J'ai encore été emmer... par le souci : https://www.google.fr/url?sa=t&rct=j&q= ... QQ&cad=rja
J'avais pas eu de souci entre novembre 2016 et aujourd'hui.
Développeur averti ;-)
Faire un don pour mes développements gratuits https://www.paypal.com/cgi-bin/webscr?c ... BA2DSQ844J

Avatar de l’utilisateur
Sylar
Timide
Messages : 499
Inscription : 02 mars 2016, 09:34
Contact :

Re: Plugin SMS

Message par Sylar » 16 juin 2017, 09:31

Bonjour,

comment reprendre l'information du status du Démon SMS ?

lavud59
Timide
Messages : 114
Inscription : 21 févr. 2015, 08:24

Re: Plugin SMS

Message par lavud59 » 16 juin 2017, 09:57

Bonjour

tu peux lancer ce code

mais souvent le plugin est ok mais il ne fonctionne pas



$DaemonInfo = sms::deamon_info();
$DaemonLaunch = $DaemonInfo['launchable'];
$DaemonState = $DaemonInfo['state'];

if ($DaemonState == "nok") {

$scenario->setLog('Log SMS :: Daemon State : '.$DaemonState);
$scenario->setLog('Log SMS :: Daemon Launchable : '.$DaemonLaunch);
$scenario->setLog('Log SMS :: Tentative relance daemon');

$DaemonStop = sms::deamon_stop();
sleep(5);
shell_exec('sudo chmod 777 /dev/tty*');
sleep(2);
$DaemonStart = sms::deamon_start();

}else{

$scenario->setLog('Log SMS :: Daemon State : '.$DaemonState);
$scenario->setLog('Log SMS :: Daemon Launchable : '.$DaemonLaunch);
}

Avatar de l’utilisateur
Sylar
Timide
Messages : 499
Inscription : 02 mars 2016, 09:34
Contact :

Re: Plugin SMS

Message par Sylar » 16 juin 2017, 11:19

lavud59 a écrit :
16 juin 2017, 09:57
Bonjour

tu peux lancer ce code

mais souvent le plugin est ok mais il ne fonctionne pas



$DaemonInfo = sms::deamon_info();
$DaemonLaunch = $DaemonInfo['launchable'];
$DaemonState = $DaemonInfo['state'];

if ($DaemonState == "nok") {

$scenario->setLog('Log SMS :: Daemon State : '.$DaemonState);
$scenario->setLog('Log SMS :: Daemon Launchable : '.$DaemonLaunch);
$scenario->setLog('Log SMS :: Tentative relance daemon');

$DaemonStop = sms::deamon_stop();
sleep(5);
shell_exec('sudo chmod 777 /dev/tty*');
sleep(2);
$DaemonStart = sms::deamon_start();

}else{

$scenario->setLog('Log SMS :: Daemon State : '.$DaemonState);
$scenario->setLog('Log SMS :: Daemon Launchable : '.$DaemonLaunch);
}


merci de ta réponse , je commence d'ou je tape la commande ou ? en ssh ? ou autre

le but est de faire un scénario qui vérifie l'état du démon si ok alors je ne fait rien si NOK , alors j'active un scénario qui notifie autrement que par sms

et en mêm temps je m'informe que le démon sms est deat

lavud59
Timide
Messages : 114
Inscription : 21 févr. 2015, 08:24

Re: Plugin SMS

Message par lavud59 » 21 juin 2017, 08:50

tu fais un scénario avec code PHP
ajouter un element code

lavud59
Timide
Messages : 114
Inscription : 21 févr. 2015, 08:24

Re: Plugin SMS

Message par lavud59 » 21 juin 2017, 08:52

tu fais un scénario avec code PHP
ajouter un element code
Pièces jointes
2017-06-21 08_49_55-Scenario - Jeedom.jpg
2017-06-21 08_49_55-Scenario - Jeedom.jpg (47.43 Kio) Consulté 744 fois

Fil
Timide
Messages : 113
Inscription : 18 nov. 2014, 08:46

Re: Plugin SMS

Message par Fil » 21 juin 2017, 09:23

Bonjour,

Chez Free et même punition chez moi depuis trois jours. Ca devient vraiment pénible.
Je passe du réseau free à orange par intermittence...le soucis vient vraiment de chez eux.
Je testerais bien un autre fournisseur quite à payer un peu plus cher.
Si quelqu'un peut me conseiller.

lavud59
Timide
Messages : 114
Inscription : 21 févr. 2015, 08:24

Re: Plugin SMS

Message par lavud59 » 21 juin 2017, 09:31

ca depend la couveture ou tu habites

Regarde :
https://www.antennesmobiles.fr/

Avatar de l’utilisateur
Sylar
Timide
Messages : 499
Inscription : 02 mars 2016, 09:34
Contact :

Re: Plugin SMS

Message par Sylar » 22 juin 2017, 09:29

lavud59 a écrit :
21 juin 2017, 08:52
tu fais un scénario avec code PHP
ajouter un element code


oki merci et pour la condition ( Evenement ) pour , lancer le scénario ?


$DaemonState == "nok" la valeur n'est pas valable ?

merci de l'aide

BetyOops
Timide
Messages : 107
Inscription : 13 avr. 2016, 14:35

Re: Plugin SMS

Message par BetyOops » 22 juin 2017, 19:02

Bonjour,

Après l'achat d'une clef 3g à 10€ qui a fonctionné 2 jours avec gammu, je me suis décidé à prendre une E220 sur ebay.

Sous mon Win10 la clef est détecté et j'ai réussi a envoyé des sms mais sous jeedom c'est une autre histoire...

J'ai l'impression qu'il ne la voit pas! Elle clignotte mais rien (que ce soit sur hub USB alimenté ou en direct sur le port usb):

Code : Tout sélectionner

jeedom@jeedom:~$ lsusb
Bus 002 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Code : Tout sélectionner

jeedom@jeedom:~$ dmesg -T
[Thu Jun 22 16:56:22 2017] Booting Linux on physical CPU 0x0
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys cpuset
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys cpu
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys cpuacct
[Thu Jun 22 16:56:22 2017] Linux version 3.14.53-fslc-imx6-sr (abuild@mxobscloud7) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu Oct 15 20:42:12 UTC 2015
[Thu Jun 22 16:56:22 2017] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
[Thu Jun 22 16:56:22 2017] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Thu Jun 22 16:56:22 2017] Machine model: SolidRun HummingBoard Solo/DualLite
[Thu Jun 22 16:56:22 2017] cma: CMA: reserved 256 MiB at 20000000
[Thu Jun 22 16:56:22 2017] Memory policy: Data cache writeback
[Thu Jun 22 16:56:22 2017] On node 0 totalpages: 131072
[Thu Jun 22 16:56:22 2017] free_area_init_node: node 0, pgdat c0b1ce00, node_mem_map cfb77000
[Thu Jun 22 16:56:22 2017]   DMA zone: 1024 pages used for memmap
[Thu Jun 22 16:56:22 2017]   DMA zone: 0 pages reserved
[Thu Jun 22 16:56:22 2017]   DMA zone: 131072 pages, LIFO batch:31
[Thu Jun 22 16:56:22 2017] CPU: All CPU(s) started in SVC mode.
[Thu Jun 22 16:56:22 2017] PERCPU: Embedded 8 pages/cpu @cfb56000 s8768 r8192 d15808 u32768
[Thu Jun 22 16:56:22 2017] pcpu-alloc: s8768 r8192 d15808 u32768 alloc=8*4096
[Thu Jun 22 16:56:22 2017] pcpu-alloc: [0] 0 [0] 1
[Thu Jun 22 16:56:22 2017] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[Thu Jun 22 16:56:22 2017] Kernel command line: console=ttymxc0,115200n8 console=tty root=/dev/mmcblk0p1 rootwait rw quiet
[Thu Jun 22 16:56:22 2017] PID hash table entries: 2048 (order: 1, 8192 bytes)
[Thu Jun 22 16:56:22 2017] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[Thu Jun 22 16:56:22 2017] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[Thu Jun 22 16:56:22 2017] allocated 1048576 bytes of page_cgroup
[Thu Jun 22 16:56:22 2017] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[Thu Jun 22 16:56:22 2017] Memory: 236444K/524288K available (7967K kernel code, 371K rwdata, 2668K rodata, 336K init, 528K bss, 287844K reserved, 0K highmem)
[Thu Jun 22 16:56:22 2017] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0a6b1e0   (10637 kB)
      .init : 0xc0a6c000 - 0xc0ac0240   ( 337 kB)
      .data : 0xc0ac2000 - 0xc0b1ed80   ( 372 kB)
       .bss : 0xc0b1ed88 - 0xc0ba2e88   ( 529 kB)
[Thu Jun 22 16:56:22 2017] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[Thu Jun 22 16:56:22 2017] Hierarchical RCU implementation.
[Thu Jun 22 16:56:22 2017]      RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[Thu Jun 22 16:56:22 2017] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[Thu Jun 22 16:56:22 2017] NR_IRQS:16 nr_irqs:16 16
[Thu Jun 22 16:56:22 2017] L2C-310 erratum 769419 enabled
[Thu Jun 22 16:56:22 2017] L2C-310 enabling early BRESP for Cortex-A9
[Thu Jun 22 16:56:22 2017] L2C-310 cache controller enabled, 16 ways, 512 kB
[Thu Jun 22 16:56:22 2017] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x72450000
[Thu Jun 22 16:56:22 2017] Switching to timer-based delay loop
[Thu Jun 22 16:56:22 2017] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655765682ns
[Thu Jun 22 16:56:22 2017] Console: colour dummy device 80x30
[Thu Jun 22 16:56:22 2017] console [tty0] enabled
[Thu Jun 22 16:56:22 2017] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=3000)
[Thu Jun 22 16:56:22 2017] pid_max: default: 32768 minimum: 301
[Thu Jun 22 16:56:22 2017] Security Framework initialized
[Thu Jun 22 16:56:22 2017] SELinux:  Initializing.
[Thu Jun 22 16:56:22 2017] SELinux:  Starting in permissive mode
[Thu Jun 22 16:56:22 2017] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[Thu Jun 22 16:56:22 2017] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys memory
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys devices
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys freezer
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys net_cls
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys blkio
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys bfqio
[Thu Jun 22 16:56:22 2017] Initializing cgroup subsys perf_event
[Thu Jun 22 16:56:22 2017] CPU: Testing write buffer coherency: ok
[Thu Jun 22 16:56:22 2017] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Thu Jun 22 16:56:22 2017] Setting up static identity map for 0x10795ee0 - 0x10795f38
[Thu Jun 22 16:56:22 2017] CPU1: failed to boot: -38
[Thu Jun 22 16:56:22 2017] Brought up 1 CPUs
[Thu Jun 22 16:56:22 2017] SMP: Total of 1 processors activated (6.00 BogoMIPS).
[Thu Jun 22 16:56:22 2017] CPU: All CPU(s) started in SVC mode.
[Thu Jun 22 16:56:22 2017] devtmpfs: initialized
[Thu Jun 22 16:56:22 2017] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[Thu Jun 22 16:56:22 2017] atomic64 test passed
[Thu Jun 22 16:56:22 2017] pinctrl core: initialized pinctrl subsystem
[Thu Jun 22 16:56:22 2017] regulator-dummy: no parameters
[Thu Jun 22 16:56:22 2017] NET: Registered protocol family 16
[Thu Jun 22 16:56:22 2017] DMA: preallocated 256 KiB pool for atomic coherent allocations
[Thu Jun 22 16:56:22 2017] cpuidle: using governor ladder
[Thu Jun 22 16:56:22 2017] cpuidle: using governor menu
[Thu Jun 22 16:56:22 2017] CPU identified as i.MX6DL, silicon rev 1.3
[Thu Jun 22 16:56:22 2017] Use WDOG1 as reset source
[Thu Jun 22 16:56:22 2017] syscon 20c8000.anatop: regmap [mem 0x020c8000-0x020c8fff] registered
[Thu Jun 22 16:56:22 2017] vdd1p1: 800 <--> 1375 mV at 1100 mV
[Thu Jun 22 16:56:22 2017] vdd3p0: 2800 <--> 3150 mV at 3000 mV
[Thu Jun 22 16:56:22 2017] vdd2p5: 2000 <--> 2750 mV at 2400 mV
[Thu Jun 22 16:56:22 2017] vddarm: 725 <--> 1450 mV at 1150 mV
[Thu Jun 22 16:56:22 2017] vddpu: 725 <--> 1450 mV at 1150 mV
[Thu Jun 22 16:56:22 2017] vddsoc: 725 <--> 1450 mV at 1200 mV
[Thu Jun 22 16:56:22 2017] syscon 20e0000.iomuxc-gpr: regmap [mem 0x020e0000-0x020e0037] registered
[Thu Jun 22 16:56:22 2017] syscon 21bc000.ocotp-ctrl: regmap [mem 0x021bc000-0x021bffff] registered
[Thu Jun 22 16:56:22 2017] No ATAGs?
[Thu Jun 22 16:56:22 2017] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[Thu Jun 22 16:56:22 2017] hw-breakpoint: maximum watchpoint size is 4 bytes.
[Thu Jun 22 16:56:22 2017] imx6dl-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[Thu Jun 22 16:56:22 2017] bio: create slab <bio-0> at 0
[Thu Jun 22 16:56:22 2017] mxs-dma 110000.dma-apbh: initialized
[Thu Jun 22 16:56:22 2017] brcm_osc_reg: 3300 mV
[Thu Jun 22 16:56:22 2017] brcm_reg: 3300 mV
[Thu Jun 22 16:56:22 2017] 3P3V: 3300 mV
[Thu Jun 22 16:56:22 2017] usb_h1_vbus: 5000 mV
[Thu Jun 22 16:56:22 2017] usb_otg_vbus: 5000 mV
[Thu Jun 22 16:56:22 2017] USDHC2-VBUS: 3300 mV
[Thu Jun 22 16:56:22 2017] vgaarb: loaded
[Thu Jun 22 16:56:22 2017] SCSI subsystem initialized
[Thu Jun 22 16:56:22 2017] libata version 3.00 loaded.
[Thu Jun 22 16:56:22 2017] usbcore: registered new interface driver usbfs
[Thu Jun 22 16:56:22 2017] usbcore: registered new interface driver hub
[Thu Jun 22 16:56:22 2017] usbcore: registered new device driver usb
[Thu Jun 22 16:56:22 2017] usbphy_nop1.12 supply vcc not found, using dummy regulator
[Thu Jun 22 16:56:22 2017] usbphy_nop2.13 supply vcc not found, using dummy regulator
[Thu Jun 22 16:56:22 2017] i2c i2c-0: IMX I2C adapter registered
[Thu Jun 22 16:56:22 2017] i2c i2c-1: IMX I2C adapter registered
[Thu Jun 22 16:56:22 2017] media: Linux media interface: v0.10
[Thu Jun 22 16:56:22 2017] Linux video capture interface: v2.00
[Thu Jun 22 16:56:22 2017] pps_core: LinuxPPS API ver. 1 registered
[Thu Jun 22 16:56:22 2017] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[Thu Jun 22 16:56:22 2017] PTP clock support registered
[Thu Jun 22 16:56:22 2017] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[Thu Jun 22 16:56:22 2017] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
[Thu Jun 22 16:56:22 2017] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
[Thu Jun 22 16:56:22 2017] MIPI CSI2 driver module loaded
[Thu Jun 22 16:56:22 2017] Advanced Linux Sound Architecture Driver Initialized.
[Thu Jun 22 16:56:22 2017] NetLabel: Initializing
[Thu Jun 22 16:56:22 2017] NetLabel:  domain hash size = 128
[Thu Jun 22 16:56:22 2017] NetLabel:  protocols = UNLABELED CIPSOv4
[Thu Jun 22 16:56:22 2017] NetLabel:  unlabeled traffic allowed by default
[Thu Jun 22 16:56:22 2017] Switched to clocksource mxc_timer1
[Thu Jun 22 16:56:22 2017] NET: Registered protocol family 2
[Thu Jun 22 16:56:22 2017] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[Thu Jun 22 16:56:22 2017] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[Thu Jun 22 16:56:22 2017] TCP: Hash tables configured (established 4096 bind 4096)
[Thu Jun 22 16:56:22 2017] TCP: reno registered
[Thu Jun 22 16:56:22 2017] UDP hash table entries: 256 (order: 1, 8192 bytes)
[Thu Jun 22 16:56:22 2017] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[Thu Jun 22 16:56:22 2017] NET: Registered protocol family 1
[Thu Jun 22 16:56:22 2017] RPC: Registered named UNIX socket transport module.
[Thu Jun 22 16:56:22 2017] RPC: Registered udp transport module.
[Thu Jun 22 16:56:22 2017] RPC: Registered tcp transport module.
[Thu Jun 22 16:56:22 2017] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Thu Jun 22 16:56:22 2017] PCI: CLS 0 bytes, default 64
[Thu Jun 22 16:56:22 2017] Trying to unpack rootfs image as initramfs...
[Thu Jun 22 16:56:22 2017] Freeing initrd memory: 7572K (c4800000 - c4f65000)
[Thu Jun 22 16:56:22 2017] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[Thu Jun 22 16:56:22 2017] ------------[ cut here ]------------
[Thu Jun 22 16:56:22 2017] WARNING: CPU: 0 PID: 41 at /usr/src/packages/BUILD/linux/crypto/testmgr.c:3334 alg_test+0x80/0x288()
[Thu Jun 22 16:56:22 2017] Modules linked in:
[Thu Jun 22 16:56:22 2017] CPU: 0 PID: 41 Comm: cryptomgr_test Not tainted 3.14.53-fslc-imx6-sr #1
[Thu Jun 22 16:56:22 2017] [<c0015400>] (unwind_backtrace) from [<c00116ac>] (show_stack+0x10/0x14)
[Thu Jun 22 16:56:22 2017] [<c00116ac>] (show_stack) from [<c078cf94>] (dump_stack+0x88/0x98)
[Thu Jun 22 16:56:22 2017] [<c078cf94>] (dump_stack) from [<c002ae6c>] (warn_slowpath_common+0x70/0x8c)
[Thu Jun 22 16:56:22 2017] [<c002ae6c>] (warn_slowpath_common) from [<c002af24>] (warn_slowpath_null+0x1c/0x24)
[Thu Jun 22 16:56:22 2017] [<c002af24>] (warn_slowpath_null) from [<c027c080>] (alg_test+0x80/0x288)
[Thu Jun 22 16:56:22 2017] [<c027c080>] (alg_test) from [<c027977c>] (cryptomgr_test+0x40/0x48)
[Thu Jun 22 16:56:22 2017] [<c027977c>] (cryptomgr_test) from [<c0047214>] (kthread+0xd0/0xe8)
[Thu Jun 22 16:56:22 2017] [<c0047214>] (kthread) from [<c000e3e0>] (ret_from_fork+0x14/0x34)
[Thu Jun 22 16:56:22 2017] ---[ end trace f7a8bd0ebf4a6c36 ]---
[Thu Jun 22 16:56:22 2017] testmgr: alg_test_descs entries in wrong order: 'authenc(hmac(sha512),cbc(aes))' before 'authenc(hmac(md5),cbc(aes))'
[Thu Jun 22 16:56:22 2017] Bus freq driver module loaded
[Thu Jun 22 16:56:22 2017] futex hash table entries: 512 (order: 3, 32768 bytes)
[Thu Jun 22 16:56:22 2017] audit: initializing netlink subsys (disabled)
[Thu Jun 22 16:56:22 2017] audit: type=2000 audit(0.668:1): initialized
[Thu Jun 22 16:56:22 2017] VFS: Disk quotas dquot_6.5.2
[Thu Jun 22 16:56:22 2017] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Thu Jun 22 16:56:22 2017] NFS: Registering the id_resolver key type
[Thu Jun 22 16:56:22 2017] Key type id_resolver registered
[Thu Jun 22 16:56:22 2017] Key type id_legacy registered
[Thu Jun 22 16:56:22 2017] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Thu Jun 22 16:56:22 2017] fuse init (API version 7.22)
[Thu Jun 22 16:56:22 2017] msgmni has been set to 988
[Thu Jun 22 16:56:22 2017] Key type big_key registered
[Thu Jun 22 16:56:22 2017] SELinux:  Registering netfilter hooks
[Thu Jun 22 16:56:22 2017] alg: No test for stdrng (krng)
[Thu Jun 22 16:56:22 2017] NET: Registered protocol family 38
[Thu Jun 22 16:56:22 2017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[Thu Jun 22 16:56:22 2017] io scheduler noop registered
[Thu Jun 22 16:56:22 2017] io scheduler deadline registered
[Thu Jun 22 16:56:22 2017] io scheduler cfq registered
[Thu Jun 22 16:56:22 2017] io scheduler bfq registered (default)
[Thu Jun 22 16:56:22 2017] BFQ I/O-scheduler: v7r8
[Thu Jun 22 16:56:22 2017] imx6q-pcie 1ffc000.pcie: phy link never came up
[Thu Jun 22 16:56:22 2017] imx6q-pcie 1ffc000.pcie: Failed to bring link up!
[Thu Jun 22 16:56:22 2017] imx6q-pcie 1ffc000.pcie: failed to initialize host
[Thu Jun 22 16:56:22 2017] imx6q-pcie: probe of 1ffc000.pcie failed with error -22
[Thu Jun 22 16:56:22 2017] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0x1a:0xa0:0xc1
[Thu Jun 22 16:56:22 2017] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[Thu Jun 22 16:56:22 2017] mxc_sdc_fb fb.26: registered mxc display driver hdmi IPU1_DISP0
[Thu Jun 22 16:56:22 2017] mxc_sdc_fb fb.26: registered mxc display driver hdmi
[Thu Jun 22 16:56:23 2017] imx-ipuv3 2400000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[Thu Jun 22 16:56:23 2017] Console: switching to colour frame buffer device 240x67
[Thu Jun 22 16:56:23 2017] imx-sdma 20ec000.sdma: no iram assigned, using external mem
[Thu Jun 22 16:56:23 2017] imx-sdma 20ec000.sdma: no event needs to be remapped
[Thu Jun 22 16:56:23 2017] imx-sdma 20ec000.sdma: initialized
[Thu Jun 22 16:56:23 2017] imx-sdma 20ec000.sdma: loaded firmware 3.1
[Thu Jun 22 16:56:23 2017] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[Thu Jun 22 16:56:23 2017] Serial: IMX driver
[Thu Jun 22 16:56:23 2017] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 58, base_baud = 5000000) is a IMX
[Thu Jun 22 16:56:23 2017] console [ttymxc0] enabled
[Thu Jun 22 16:56:23 2017] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 61, base_baud = 5000000) is a IMX
[Thu Jun 22 16:56:23 2017] serial: Freescale lpuart driver
[Thu Jun 22 16:56:23 2017] [drm] Initialized drm 1.1.0 20060810
[Thu Jun 22 16:56:23 2017] [drm] Initialized vivante 1.0.0 20120216 on minor 0
[Thu Jun 22 16:56:23 2017] galcore: clk_get vg clock failed, disable vg!
[Thu Jun 22 16:56:23 2017] Galcore version 5.0.11.25762
[Thu Jun 22 16:56:23 2017] brd: module loaded
[Thu Jun 22 16:56:23 2017] loop: module loaded
[Thu Jun 22 16:56:23 2017] libphy: Fixed MDIO Bus: probed
[Thu Jun 22 16:56:23 2017] 2188000.ethernet supply phy not found, using dummy regulator
[Thu Jun 22 16:56:23 2017] pps pps0: new PPS source ptp0
[Thu Jun 22 16:56:23 2017] libphy: fec_enet_mii_bus: probed
[Thu Jun 22 16:56:23 2017] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Atheros 8035 ethernet] (mii_bus:phy_addr=2188000.ethernet:00, irq=-1)
[Thu Jun 22 16:56:23 2017] fec 2188000.ethernet eth0: registered PHC device 0
[Thu Jun 22 16:56:23 2017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[Thu Jun 22 16:56:23 2017] ehci-pci: EHCI PCI platform driver
[Thu Jun 22 16:56:23 2017] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[Thu Jun 22 16:56:23 2017] ohci-pci: OHCI PCI platform driver
[Thu Jun 22 16:56:23 2017] uhci_hcd: USB Universal Host Controller Interface driver
[Thu Jun 22 16:56:23 2017] usbcore: registered new interface driver usb-storage
[Thu Jun 22 16:56:23 2017] usbcore: registered new interface driver ums-usbat
[Thu Jun 22 16:56:23 2017] usbcore: registered new interface driver usbserial
[Thu Jun 22 16:56:23 2017] usbcore: registered new interface driver usbserial_generic
[Thu Jun 22 16:56:23 2017] usbserial: USB Serial support registered for generic
[Thu Jun 22 16:56:23 2017] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.0: EHCI Host Controller
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[Thu Jun 22 16:56:23 2017] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Thu Jun 22 16:56:23 2017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Thu Jun 22 16:56:23 2017] usb usb1: Product: EHCI Host Controller
[Thu Jun 22 16:56:23 2017] usb usb1: Manufacturer: Linux 3.14.53-fslc-imx6-sr ehci_hcd
[Thu Jun 22 16:56:23 2017] usb usb1: SerialNumber: ci_hdrc.0
[Thu Jun 22 16:56:23 2017] hub 1-0:1.0: USB hub found
[Thu Jun 22 16:56:23 2017] hub 1-0:1.0: 1 port detected
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.1: doesn't support gadget
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.1: EHCI Host Controller
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
[Thu Jun 22 16:56:23 2017] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[Thu Jun 22 16:56:23 2017] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[Thu Jun 22 16:56:23 2017] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Thu Jun 22 16:56:23 2017] usb usb2: Product: EHCI Host Controller
[Thu Jun 22 16:56:23 2017] usb usb2: Manufacturer: Linux 3.14.53-fslc-imx6-sr ehci_hcd
[Thu Jun 22 16:56:23 2017] usb usb2: SerialNumber: ci_hdrc.1
[Thu Jun 22 16:56:23 2017] hub 2-0:1.0: USB hub found
[Thu Jun 22 16:56:23 2017] hub 2-0:1.0: 1 port detected
[Thu Jun 22 16:56:23 2017] mousedev: PS/2 mouse device common for all mice
[Thu Jun 22 16:56:23 2017] rtc-pcf8523: probe of 0-0068 failed with error -5
[Thu Jun 22 16:56:23 2017] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
[Thu Jun 22 16:56:23 2017] i2c /dev entries driver
[Thu Jun 22 16:56:23 2017] mxc_v4l2_output v4l2_out.31: V4L2 device registered as video16
[Thu Jun 22 16:56:23 2017] mxc_v4l2_output v4l2_out.31: V4L2 device registered as video17
[Thu Jun 22 16:56:23 2017] imx2-wdt 20bc000.wdog: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=0)
[Thu Jun 22 16:56:23 2017] device-mapper: uevent: version 1.0.3
[Thu Jun 22 16:56:23 2017] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[Thu Jun 22 16:56:23 2017] sdhci: Secure Digital Host Controller Interface driver
[Thu Jun 22 16:56:23 2017] sdhci: Copyright(c) Pierre Ossman
[Thu Jun 22 16:56:23 2017] sdhci-pltfm: SDHCI platform and OF driver helper
[Thu Jun 22 16:56:23 2017] mmc1: no vqmmc regulator found
[Thu Jun 22 16:56:23 2017] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
[Thu Jun 22 16:56:23 2017] mmc0: no vqmmc regulator found
[Thu Jun 22 16:56:23 2017] mmc0: no vmmc regulator found
[Thu Jun 22 16:56:23 2017] usb 2-1: new high-speed USB device number 2 using ci_hdrc
[Thu Jun 22 16:56:23 2017] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
[Thu Jun 22 16:56:23 2017] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[Thu Jun 22 16:56:23 2017] mxc_vpu 2040000.vpu: VPU initialized
[Thu Jun 22 16:56:23 2017] mxc_hdmi_cec hdmi_cec.4: HDMI CEC initialized
[Thu Jun 22 16:56:24 2017] caam 2100000.caam: Instantiated RNG4 SH0
[Thu Jun 22 16:56:24 2017] caam 2100000.caam: Instantiated RNG4 SH1
[Thu Jun 22 16:56:24 2017] caam 2100000.caam: device ID = 0x0a160100 (Era 4)
[Thu Jun 22 16:56:24 2017] caam 2100000.caam: job rings = 2, qi = 0
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(md5),cbc(aes)) (authencesn-hmac-md5-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authenc(hmac(sha1),cbc(aes)) (authenc-hmac-sha1-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha1),cbc(aes)) (authencesn-hmac-sha1-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha224),cbc(aes)) (authencesn-hmac-sha224-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authenc(hmac(sha256),cbc(aes)) (authenc-hmac-sha256-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha256),cbc(aes)) (authencesn-hmac-sha256-cbc-aes-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(md5),cbc(des3_ede)) (authencesn-hmac-md5-cbc-des3_ede-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha1),cbc(des3_ede)) (authencesn-hmac-sha1-cbc-des3_ede-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha224),cbc(des3_ede)) (authencesn-hmac-sha224-cbc-des3_ede-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha256),cbc(des3_ede)) (authencesn-hmac-sha256-cbc-des3_ede-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(md5),cbc(des)) (authencesn-hmac-md5-cbc-des-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha1),cbc(des)) (authencesn-hmac-sha1-cbc-des-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha224),cbc(des)) (authencesn-hmac-sha224-cbc-des-caam)
[Thu Jun 22 16:56:24 2017] alg: No test for authencesn(hmac(sha256),cbc(des)) (authencesn-hmac-sha256-cbc-des-caam)
[Thu Jun 22 16:56:24 2017] caam algorithms registered in /proc/crypto
[Thu Jun 22 16:56:24 2017] hmac-sha1-caam alg registration failed
[Thu Jun 22 16:56:24 2017] sha1-caam alg registration failed
[Thu Jun 22 16:56:24 2017] hmac-sha224-caam alg registration failed
[Thu Jun 22 16:56:24 2017] sha224-caam alg registration failed
[Thu Jun 22 16:56:24 2017] hmac-sha256-caam alg registration failed
[Thu Jun 22 16:56:24 2017] sha256-caam alg registration failed
[Thu Jun 22 16:56:24 2017] hmac-md5-caam alg registration failed
[Thu Jun 22 16:56:24 2017] md5-caam alg registration failed
[Thu Jun 22 16:56:24 2017] xcbc-aes-caam alg registration failed
[Thu Jun 22 16:56:24 2017] xcbc-aes-caam alg registration failed
[Thu Jun 22 16:56:24 2017] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[Thu Jun 22 16:56:24 2017] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Thu Jun 22 16:56:24 2017] usb 2-1: Product: USB2.0 Hub
[Thu Jun 22 16:56:24 2017] caam_jr 2101000.jr0: registering rng-caam
[Thu Jun 22 16:56:24 2017] hidraw: raw HID events driver (C) Jiri Kosina
[Thu Jun 22 16:56:24 2017] hub 2-1:1.0: USB hub found
[Thu Jun 22 16:56:24 2017] usbcore: registered new interface driver usbhid
[Thu Jun 22 16:56:24 2017] usbhid: USB HID core driver
[Thu Jun 22 16:56:24 2017] hub 2-1:1.0: 4 ports detected
[Thu Jun 22 16:56:24 2017] sgtl5000: probe of 0-000a failed with error -5
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:24 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:24 2017] imx-spdif sound-spdif.28: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
[Thu Jun 22 16:56:24 2017] imx-audio-hdmi sound-hdmi.29: hdmi-hifi <-> hdmi_audio.3 mapping ok
[Thu Jun 22 16:56:24 2017] ip_tables: (C) 2000-2006 Netfilter Core Team
[Thu Jun 22 16:56:24 2017] TCP: cubic registered
[Thu Jun 22 16:56:24 2017] Initializing XFRM netlink socket
[Thu Jun 22 16:56:24 2017] NET: Registered protocol family 10
[Thu Jun 22 16:56:24 2017] mip6: Mobile IPv6
[Thu Jun 22 16:56:24 2017] NET: Registered protocol family 17
[Thu Jun 22 16:56:24 2017] 8021q: 802.1Q VLAN Support v1.8
[Thu Jun 22 16:56:24 2017] Key type dns_resolver registered
[Thu Jun 22 16:56:24 2017] registered taskstats version 1
[Thu Jun 22 16:56:24 2017] regulator-dummy: disabling
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:24 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:24 2017] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 1970-02-11 21:24:36 UTC (3619476)
[Thu Jun 22 16:56:24 2017] ALSA device list:
[Thu Jun 22 16:56:24 2017]   #0: On-board SPDIF
[Thu Jun 22 16:56:24 2017]   #1: imx-hdmi-soc
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:24 2017] Freeing unused kernel memory: 336K (c0a6c000 - c0ac0000)
[Thu Jun 22 16:56:24 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:24 2017] systemd-udevd[141]: starting version 215
[Thu Jun 22 16:56:24 2017] random: systemd-udevd urandom read with 37 bits of entropy available
[Thu Jun 22 16:56:24 2017] usb 2-1.3: new high-speed USB device number 3 using ci_hdrc
[Thu Jun 22 16:56:24 2017] usb 2-1.3: New USB device found, idVendor=05e3, idProduct=0608
[Thu Jun 22 16:56:24 2017] usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Thu Jun 22 16:56:24 2017] usb 2-1.3: Product: USB2.0 Hub
[Thu Jun 22 16:56:24 2017] hub 2-1.3:1.0: USB hub found
[Thu Jun 22 16:56:24 2017] hub 2-1.3:1.0: 4 ports detected
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:24 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:24 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:25 2017] mmc0: host does not support reading read-only switch. assuming write-enable.
[Thu Jun 22 16:56:25 2017] mmc0: Problem setting current limit to 3!
[Thu Jun 22 16:56:25 2017] mmc0: Problem setting current limit to 2!
[Thu Jun 22 16:56:25 2017] mmc0: new ultra high speed DDR50 SDHC card at address aaaa
[Thu Jun 22 16:56:25 2017] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[Thu Jun 22 16:56:25 2017]  mmcblk0: p1
[Thu Jun 22 16:56:25 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:25 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:25 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:25 2017] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[Thu Jun 22 16:56:25 2017] random: nonblocking pool is initialized
[Thu Jun 22 16:56:26 2017] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[Thu Jun 22 16:56:26 2017] systemd[1]: Found ordering cycle on basic.target/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Found dependency on sysinit.target/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Found dependency on console-setup.service/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Found dependency on remote-fs.target/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Found dependency on remote-fs-pre.target/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Found dependency on connman.service/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Found dependency on basic.target/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Breaking ordering cycle by deleting job console-setup.service/start
[Thu Jun 22 16:56:26 2017] systemd[1]: Job console-setup.service/start deleted to break ordering cycle starting with basic.target/start
[Thu Jun 22 16:56:26 2017] systemd-udevd[224]: starting version 215
[Thu Jun 22 16:56:26 2017] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[Thu Jun 22 16:56:27 2017] Adding 262140k swap on /swapfile1.  Priority:-1 extents:1 across:262140k SS
[Thu Jun 22 16:56:28 2017] IR keymap rc-rc6-mce not found
[Thu Jun 22 16:56:28 2017] Registered IR keymap rc-empty
[Thu Jun 22 16:56:28 2017] input: gpio_ir_recv as /devices/soc0/ir-receiver.25/rc/rc0/input0
[Thu Jun 22 16:56:28 2017] rc0: gpio_ir_recv as /devices/soc0/ir-receiver.25/rc/rc0
[Thu Jun 22 16:56:28 2017] IR NEC protocol handler initialized
[Thu Jun 22 16:56:28 2017] IR RC5(x) protocol handler initialized
[Thu Jun 22 16:56:28 2017] IR RC6 protocol handler initialized
[Thu Jun 22 16:56:28 2017] IR JVC protocol handler initialized
[Thu Jun 22 16:56:28 2017] IR Sony protocol handler initialized
[Thu Jun 22 16:56:28 2017] IR SANYO protocol handler initialized
[Thu Jun 22 16:56:28 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:28 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:28 2017] input: MCE IR Keyboard/Mouse (gpio-rc-recv) as /devices/virtual/input/input1
[Thu Jun 22 16:56:28 2017] IR MCE Keyboard/mouse protocol handler initialized
[Thu Jun 22 16:56:28 2017] lirc_dev: IR Remote Control driver registered, major 241
[Thu Jun 22 16:56:28 2017] rc rc0: lirc_dev: driver ir-lirc-codec (gpio-rc-recv) registered at minor = 0
[Thu Jun 22 16:56:28 2017] IR LIRC bridge handler initialized
[Thu Jun 22 16:56:28 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:29 2017] V4L2 device 'Mxc Camera' on IPU1_CSI1 registered as video0
[Thu Jun 22 16:56:29 2017] imx-sgtl5000 sound-sgtl5000.27: ASoC: CODEC (null) not registered
[Thu Jun 22 16:56:29 2017] imx-sgtl5000 sound-sgtl5000.27: snd_soc_register_card failed (-517)
[Thu Jun 22 16:56:29 2017] platform sound-sgtl5000.27: Driver imx-sgtl5000 requests probe deferral
[Thu Jun 22 16:56:29 2017] nf_conntrack version 0.5.0 (7914 buckets, 31656 max)
[Thu Jun 22 16:56:30 2017] Bluetooth: Core ver 2.18
[Thu Jun 22 16:56:30 2017] NET: Registered protocol family 31
[Thu Jun 22 16:56:30 2017] Bluetooth: HCI device and connection manager initialized
[Thu Jun 22 16:56:30 2017] Bluetooth: HCI socket layer initialized
[Thu Jun 22 16:56:30 2017] Bluetooth: L2CAP socket layer initialized
[Thu Jun 22 16:56:30 2017] Bluetooth: SCO socket layer initialized
[Thu Jun 22 16:56:31 2017] systemd-journald[219]: Received request to flush runtime journal from PID 1
[Thu Jun 22 16:56:31 2017] libphy: 2188000.ethernet:00 - Link is Up - 100/Full
[Thu Jun 22 16:56:31 2017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Thu Jun 22 16:56:31 2017] Bluetooth: BNEP filters: protocol multicast
[Thu Jun 22 16:56:31 2017] Bluetooth: BNEP socket layer initialized
[Thu Jun 22 16:56:31 2017] mxc_v4l_open: Mxc Camera no sensor ipu0/csi1
[Thu Jun 22 16:57:31 2017] tun: Universal TUN/TAP device driver, 1.6
[Thu Jun 22 16:57:31 2017] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[Thu Jun 22 16:57:32 2017] Netfilter messages via NETLINK v0.30.
[Thu Jun 22 16:57:32 2017] device eth0 entered promiscuous mode

Une idée ??

Merci !
Lenovo M720 Tiny - VMWare Debian 9 Jeedom DIY
Zwave - Bluetooth
Alexa Echo - Harmony Elite

Répondre

Revenir vers « [Plugin Officiel] SMS »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 1 invité