Ce Forum passera en lecture seule en janvier 2020
Image
Merci de vous rendre sur https://community.jeedom.com maintenant pour vos prochains postes ;)

Impossible de contacter le serveur Z-wave

Retrouvez ici des sujets concernant le protocole Z-Wave et les modules domotiques de type Z-Wave utilisés avec JEEDOM
eldoctor62
Actif
Messages : 1089
Inscription : 12 nov. 2014, 15:44

Impossible de contacter le serveur Z-wave

Message par eldoctor62 » 12 sept. 2019, 10:40

Hi all !

Coincidence ou pas mais je ne touche jamais a rien si ce n'est les MAj depuis quaisi plus d'un an... C'est dire la fiab de jeedom ;)

Mais Hier, depuis la MAJ Jeedom en 3,3,31 et d'openzwave

J'ai le defaut Impossible de contacter le serveur Z-wave sur ma Z-Stick Gen5 USB

J'ai lu la doc et et éteint propre mon odroid c2 avec 5 minutes mini sans la clé mais idem.

Dans mes logs j'ai ceci :

Code : Tout sélectionner

[2019-09-12 10:10:36][ERROR] : Impossible de lancer le démon openzwave, relancer le démon en debug et vérifiez la log
[2019-09-12 10:15:06][INFO] : Lancement démon openzwave : /usr/bin/python /var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/openzwaved.py  --device auto --loglevel debug --port 8083 --config_folder /var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/config --data_folder /var/www/html/plugins/openzwave/core/class/../../data --callback http://127.0.0.1:80/plugins/openzwave/core/php/jeeZwave.php --apikey VYihp5MjqxyuF8xnwNVtbSSC0EDGbWpeuj4YxUZg8lBQlpHU --suppressRefresh 0 --cycle 0.3 --pid /tmp/jeedom/openzwave/deamon.pid --disabledNodes 60,--,62,61
Traceback (most recent call last):
File "/var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/openzwaved.py", line 67, in <module>
globals.disabled_nodes = [int(disabled_node_id) for disabled_node_id in args.disabledNodes.split(',')]
ValueError: invalid literal for int() with base 10: '--'
[2019-09-12 10:15:36][ERROR] : Impossible de lancer le démon openzwave, relancer le démon en debug et vérifiez la log
Après une instal des dépendances mon logs donne ceci :

Code : Tout sélectionner

Lancement de l'installation/mise à jour des dépendances openzwave
Atteint:1 http://security.debian.org stretch/updates InRelease
Atteint:4 https://deb.nodesource.com/node_8.x stretch InRelease
Atteint:2 https://apt.armbian.com stretch InRelease
Ign:3 http://cdn-fastly.deb.debian.org/debian stretch InRelease
Atteint:5 http://cdn-fastly.deb.debian.org/debian stretch-updates InRelease
Atteint:6 http://cdn-fastly.deb.debian.org/debian stretch-backports InRelease
Atteint:7 http://cdn-fastly.deb.debian.org/debian stretch Release
Lecture des listes de paquets...
Installation des dependances
Lecture des listes de paquets...
Construction de l'arbre des d?pendances...
Lecture des informations d'?tat...
build-essential is already the newest version (12.3).
g++ is already the newest version (4:6.3.0-4).
gcc is already the newest version (4:6.3.0-4).
git is already the newest version (1:2.11.0-3+deb9u4).
libjpeg-dev is already the newest version (1:1.5.1-2).
python-louie is already the newest version (1.1-2.1).
python-lxml is already the newest version (3.7.1-1).
make is already the newest version (4.1-9.1).
python-serial is already the newest version (3.2.1-1).
python-dev is already the newest version (2.7.13-2).
python-pip is already the newest version (9.0.1-2+deb9u1).
python-setuptools is already the newest version (33.1.1-1).
python-pyudev is already the newest version (0.21.0-1).
python-requests is already the newest version (2.12.4-1).
libudev-dev is already the newest version (232-25+deb9u12).
unzip is already the newest version (6.0-21+deb9u2).
0 mis ? jour, 0 nouvellement install?s, 0 ? enlever et 73 non mis ? jour.
Installation des dependances Python
Requirement already satisfied: urwid in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: louie in /usr/lib/python2.7/dist-packages
Requirement already satisfied: nose>=0.8.3 in /usr/lib/python2.7/dist-packages (from louie)
Requirement already satisfied: six in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: tornado in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: backports_abc>=0.4 in /usr/local/lib/python2.7/dist-packages (from tornado)
Requirement already satisfied: futures in /usr/local/lib/python2.7/dist-packages (from tornado)
Requirement already satisfied: singledispatch in /usr/local/lib/python2.7/dist-packages (from tornado)
Requirement already satisfied: six in /usr/local/lib/python2.7/dist-packages (from singledispatch->tornado)
mkdir: impossible de cr?er le r?pertoire << /opt >>: Le fichier existe
Désinstallation de la version précédente
Installation de Python-OpenZwave
Not uninstalling cython at /usr/lib/python2.7/dist-packages, outside environment /usr
apt-get install --force-yes -y cython
Lecture des listes de paquets...
Construction de l'arbre des d?pendances...
Lecture des informations d'?tat...
cython is already the newest version (0.25.2-1).
0 mis ? jour, 0 nouvellement install?s, 0 ? enlever et 73 non mis ? jour.
Installing dependencies for python : 2 7 13
apt-get install --force-yes -y python-pip python-dev python-docutils python-setuptools python-louie
Lecture des listes de paquets...
Construction de l'arbre des d?pendances...
Lecture des informations d'?tat...
python-louie is already the newest version (1.1-2.1).
python-dev is already the newest version (2.7.13-2).
python-docutils is already the newest version (0.13.1+dfsg-2).
python-pip is already the newest version (9.0.1-2+deb9u1).
python-setuptools is already the newest version (33.1.1-1).
0 mis ? jour, 0 nouvellement install?s, 0 ? enlever et 73 non mis ? jour.
apt-get install --force-yes -y build-essential libudev-dev g++
Lecture des listes de paquets...
Construction de l'arbre des d?pendances...
Lecture des informations d'?tat...
build-essential is already the newest version (12.3).
g++ is already the newest version (4:6.3.0-4).
libudev-dev is already the newest version (232-25+deb9u12).
0 mis ? jour, 0 nouvellement install?s, 0 ? enlever et 73 non mis ? jour.
apt-get install --force-yes -y cython
Lecture des listes de paquets...
Construction de l'arbre des d?pendances...
Lecture des informations d'?tat...
cython is already the newest version (0.25.2-1).
0 mis ? jour, 0 nouvellement install?s, 0 ? enlever et 73 non mis ? jour.
pip install nose-html
Requirement already satisfied: nose-html in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: nose>=0.11.1 in /usr/lib/python2.7/dist-packages (from nose-html)
pip install nose-progressive
Requirement already satisfied: nose-progressive in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: nose>=1.2.1 in /usr/lib/python2.7/dist-packages (from nose-progressive)
Requirement already satisfied: blessings<2.0,>=1.3 in /usr/local/lib/python2.7/dist-packages (from nose-progressive)
Requirement already satisfied: six in /usr/local/lib/python2.7/dist-packages (from blessings<2.0,>=1.3->nose-progressive)
pip install coverage
Requirement already satisfied: coverage in /usr/local/lib/python2.7/dist-packages
pip install nose
Requirement already satisfied: nose in /usr/lib/python2.7/dist-packages
pip install pylint
Requirement already satisfied: pylint in /usr/local/lib/python2.7/dist-packages
Requirement already satisfied: mccabe in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: singledispatch; python_version < "3.4" in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: configparser; python_version == "2.7" in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: backports.functools-lru-cache; python_version == "2.7" in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: astroid<2.0,>=1.6 in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: six in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: isort>=4.2.5 in /usr/local/lib/python2.7/dist-packages (from pylint)
Requirement already satisfied: enum34>=1.1.3; python_version < "3.4" in /usr/local/lib/python2.7/dist-packages (from astroid<2.0,>=1.6->pylint)
Requirement already satisfied: wrapt in /usr/local/lib/python2.7/dist-packages (from astroid<2.0,>=1.6->pylint)
Requirement already satisfied: lazy-object-proxy in /usr/local/lib/python2.7/dist-packages (from astroid<2.0,>=1.6->pylint)
Requirement already satisfied: futures in /usr/local/lib/python2.7/dist-packages (from isort>=4.2.5->pylint)
#pip install docutils
#pip install setuptools
#The following line crashes with a core dump
#pip install "Cython==0.22"
Dependencies for users installed (python 2 7 13)
sed -i -e '253s/.*//' openzwave/cpp/src/value_classes/ValueID.h
cd openzwave && make
make[1] : on entre dans le r?pertoire << /opt/python-openzwave/openzwave >>
CPPFLAGS= make -C /opt/python-openzwave/openzwave/cpp/build/ -w
make[2] : on entre dans le r?pertoire << /opt/python-openzwave/openzwave/cpp/build >>
Building OpenZWave Version 1.4.-1
Building tinystr.o
Building tinyxmlerror.o
Building tinyxml.o
Building tinyxmlparser.o
Building hid.o
Building aeskey.o
Building aescrypt.o
Building aestab.o
Building aes_modes.o
Building Proprietary.o
Building ClimateControlSchedule.o
Building ThermostatSetpoint.o
Building SensorBinary.o
Building Language.o
Building Color.o
Building Meter.o
Building Indicator.o
Building SoundSwitch.o
Building MeterPulse.o
Building ManufacturerSpecific.o
Building SwitchBinary.o
Building Basic.o
Building SwitchAll.o
Building Configuration.o
Building SwitchToggleBinary.o
Building ThermostatMode.o
Building SensorMultilevel.o
Building MultiInstance.o
Building TimeParameters.o
Building MultiChannelAssociation.o
Building UserCode.o
Building SensorAlarm.o
Building DeviceResetLocally.o
Building BarrierOperator.o
Building ThermostatFanState.o
Building Association.o
Building DoorLock.o
Building ApplicationStatus.o
Building SwitchMultilevel.o
Building Protection.o
Building NodeNaming.o
Building ManufacturerProprietary.o
Building WakeUp.o
Building MultiCmd.o
Building ThermostatFanMode.o
Building Hail.o
Building Lock.o
Building SceneActivation.o
Building CentralScene.o
Building Powerlevel.o
Building AssociationCommandConfiguration.o
Building ThermostatOperatingState.o
Building Battery.o
Building CRC16Encap.o
Building Security.o
Building ZWavePlusInfo.o
Building Version.o
Building Alarm.o
Building Clock.o
Building CommandClasses.o
Building NoOperation.o
Building BasicWindowCovering.o
Building EnergyProduction.o
Building CommandClass.o
Building DoorLockLogging.o
Building ControllerReplication.o
Building SwitchToggleMultilevel.o
Building Value.o
Building ValueList.o
Building ValueButton.o
Building ValueInt.o
Building ValueStore.o
Building ValueDecimal.o
Building ValueRaw.o
Building ValueString.o
Building ValueByte.o
Building ValueBool.o
Building ValueSchedule.o
Building ValueShort.o
Building Controller.o
Building Wait.o
Building Thread.o
Building Stream.o
Building Log.o
Building HidController.o
Building Mutex.o
Building SerialController.o
Building Event.o
Building FileOps.o
Building TimeStamp.o
Building FileOpsImpl.o
Building TimeStampImpl.o
Building WaitImpl.o
Building ThreadImpl.o
Building LogImpl.o
Building MutexImpl.o
Building SerialControllerImpl.o
Building EventImpl.o
Building Options.o
Building Scene.o
Building Utils.o
Building Driver.o
Building ZWSecurity.o
Building Group.o
Building Node.o
Building Manager.o
Building Msg.o
Building Notification.o
Creating vers.cpp
Building vers.o
Linking Static Library
Linking Shared Library
Making ozw_config file
make[2] : on quitte le r?pertoire << /opt/python-openzwave/openzwave/cpp/build >>
CPPFLAGS= make -C /opt/python-openzwave/openzwave/cpp/examples/MinOZW/ -w
make[2] : on entre dans le r?pertoire << /opt/python-openzwave/openzwave/cpp/examples/MinOZW >>
Building Main.o
Linking /opt/python-openzwave/openzwave/.lib/MinOZW
g++   -o /opt/python-openzwave/openzwave/.lib/MinOZW /opt/python-openzwave/openzwave/.lib/Main.o /opt/python-openzwave/openzwave/libopenzwave.so -pthread
Creating Temporary Shell Launch Script
make[2] : on quitte le r?pertoire << /opt/python-openzwave/openzwave/cpp/examples/MinOZW >>
make[1] : on quitte le r?pertoire << /opt/python-openzwave/openzwave >>
python setup-lib.py build
running build
running build_ext
cythoning src-lib/libopenzwave/libopenzwave.pyx to src-lib/libopenzwave/libopenzwave.cpp
building 'libopenzwave' extension
creating build
creating build/temp.linux-aarch64-2.7
creating build/temp.linux-aarch64-2.7/src-lib
creating build/temp.linux-aarch64-2.7/src-lib/libopenzwave
aarch64-linux-gnu-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -fno-strict-aliasing -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-T7HGOX/python2.7-2.7.13=. -fstack-protector-strong -Wformat -Werror=format-security -fPIC -DPY_SSIZE_T_CLEAN=1 -Iopenzwave/cpp/src/ -Iopenzwave/cpp/src/value_classes/ -Iopenzwave/cpp/src/platform/ -Iopenzwave/cpp/build/linux/ -I/usr/include/python2.7 -c src-lib/libopenzwave/libopenzwave.cpp -o build/temp.linux-aarch64-2.7/src-lib/libopenzwave/libopenzwave.o
cc1plus: warning: command line option '-Wstrict-prototypes' is valid for C/ObjC but not for C++
src-lib/libopenzwave/libopenzwave.cpp:3:0: warning: "PY_SSIZE_T_CLEAN" redefined
#define PY_SSIZE_T_CLEAN
<command-line>:0:0: note: this is the location of the previous definition
In file included from openzwave/cpp/src/aes/aescpp.h:26:0,
from openzwave/cpp/src/Driver.h:42,
from src-lib/libopenzwave/libopenzwave.cpp:459:
openzwave/cpp/src/aes/aes.h:75:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
#pragma warning( disable : 4324 )
openzwave/cpp/src/aes/aes.h:93:0: warning: ignoring #pragma warning  [-Wunknown-pragmas]
#pragma warning( default : 4324 )
src-lib/libopenzwave/libopenzwave.cpp: In function 'PyObject* __pyx_pf_12libopenzwave_9PyManager_268beginControllerCommand(__pyx_obj_12libopenzwave_PyManager*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*, PyObject*)':
src-lib/libopenzwave/libopenzwave.cpp:29891:204: warning: 'bool OpenZWave::Manager::BeginControllerCommand(uint32, OpenZWave::Driver::ControllerCommand, OpenZWave::Driver::pfnControllerCallback_t, void*, bool, uint8, uint8)' is deprecated [-Wdeprecated-declarations]
__pyx_t_6 = __Pyx_PyBool_FromLong(__pyx_v_self->manager->BeginControllerCommand(__pyx_t_1, __pyx_t_2, __pyx_f_12libopenzwave_ctrl_callback, ((void *)__pyx_v_pythonfunc), __pyx_t_3, __pyx_t_4, __pyx_t_5)); if (unlikely(!__pyx_t_6)) __PYX_ERR(0, 4120, __pyx_L1_error)
^
src-lib/libopenzwave/libopenzwave.cpp:545:36: note: in definition of macro '__Pyx_PyBool_FromLong'
#define __Pyx_PyBool_FromLong(b) ((b) ? __Pyx_NewRef(Py_True) : __Pyx_NewRef(Py_False))
^
In file included from src-lib/libopenzwave/libopenzwave.cpp:464:0:
openzwave/cpp/src/Manager.h:1731:19: note: declared here
DEPRECATED bool BeginControllerCommand( uint32 const _homeId, Driver::ControllerCommand _command, Driver::pfnControllerCallback_t _callback = NULL, void* _context = NULL, bool _highPower = false, uint8 _nodeId = 0xff, uint8 _arg = 0 );
^~~~~~~~~~~~~~~~~~~~~~
creating build/lib.linux-aarch64-2.7
aarch64-linux-gnu-g++ -pthread -shared -Wl,-O1 -Wl,-Bsymbolic-functions -Wl,-z,relro -fno-strict-aliasing -DNDEBUG -g -fwrapv -O2 -Wall -Wstrict-prototypes -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-T7HGOX/python2.7-2.7.13=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro -Wdate-time -D_FORTIFY_SOURCE=2 -g -fdebug-prefix-map=/build/python2.7-T7HGOX/python2.7-2.7.13=. -fstack-protector-strong -Wformat -Werror=format-security build/temp.linux-aarch64-2.7/src-lib/libopenzwave/libopenzwave.o openzwave/libopenzwave.a -ludev -lstdc++ -o build/lib.linux-aarch64-2.7/libopenzwave.so
python setup-lib.py install
running install
running bdist_egg
running egg_info
creating src-lib/libopenzwave.egg-info
writing requirements to src-lib/libopenzwave.egg-info/requires.txt
writing src-lib/libopenzwave.egg-info/PKG-INFO
writing top-level names to src-lib/libopenzwave.egg-info/top_level.txt
writing dependency_links to src-lib/libopenzwave.egg-info/dependency_links.txt
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
reading manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
writing manifest file 'src-lib/libopenzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-aarch64/egg
running install_lib
running build_ext
skipping 'src-lib/libopenzwave/libopenzwave.cpp' Cython extension (up-to-date)
creating build/bdist.linux-aarch64
creating build/bdist.linux-aarch64/egg
copying build/lib.linux-aarch64-2.7/libopenzwave.so -> build/bdist.linux-aarch64/egg
creating stub loader for libopenzwave.so
byte-compiling build/bdist.linux-aarch64/egg/libopenzwave.py to libopenzwave.pyc
installing package data to build/bdist.linux-aarch64/egg
running install_data
creating build/bdist.linux-aarch64/egg/config
creating build/bdist.linux-aarch64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/PKG-INFO -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/SOURCES.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/dependency_links.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/not-zip-safe -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/requires.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-lib/libopenzwave.egg-info/top_level.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
writing build/bdist.linux-aarch64/egg/EGG-INFO/native_libs.txt
creating dist
creating 'dist/libopenzwave-0.3.1-py2.7-linux-aarch64.egg' and adding 'build/bdist.linux-aarch64/egg' to it
removing 'build/bdist.linux-aarch64/egg' (and everything under it)
Processing libopenzwave-0.3.1-py2.7-linux-aarch64.egg
creating /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-aarch64.egg
Extracting libopenzwave-0.3.1-py2.7-linux-aarch64.egg to /usr/local/lib/python2.7/dist-packages
Adding libopenzwave 0.3.1 to easy-install.pth file
Installed /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-aarch64.egg
Processing dependencies for libopenzwave==0.3.1
Searching for six==1.12.0
Best match: six 1.12.0
Adding six 1.12.0 to easy-install.pth file
Using /usr/local/lib/python2.7/dist-packages
Finished processing dependencies for libopenzwave==0.3.1
Installation of lib finished.
python setup-api.py install
running install
running bdist_egg
running egg_info
creating src-api/openzwave.egg-info
writing requirements to src-api/openzwave.egg-info/requires.txt
writing src-api/openzwave.egg-info/PKG-INFO
writing top-level names to src-api/openzwave.egg-info/top_level.txt
writing dependency_links to src-api/openzwave.egg-info/dependency_links.txt
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
reading manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
writing manifest file 'src-api/openzwave.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-aarch64/egg
running install_lib
running build_py
creating build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/option.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/controller.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/scene.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/command.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/node.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/group.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/__init__.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/value.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/singleton.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/object.py -> build/lib.linux-aarch64-2.7/openzwave
copying src-api/openzwave/network.py -> build/lib.linux-aarch64-2.7/openzwave
creating build/bdist.linux-aarch64/egg
creating build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/option.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/controller.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/scene.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/command.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/node.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/group.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/__init__.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/value.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/singleton.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/object.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/openzwave/network.py -> build/bdist.linux-aarch64/egg/openzwave
copying build/lib.linux-aarch64-2.7/libopenzwave.so -> build/bdist.linux-aarch64/egg
byte-compiling build/bdist.linux-aarch64/egg/openzwave/option.py to option.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/controller.py to controller.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/scene.py to scene.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/command.py to command.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/node.py to node.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/group.py to group.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/__init__.py to __init__.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/value.py to value.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/singleton.py to singleton.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/object.py to object.pyc
byte-compiling build/bdist.linux-aarch64/egg/openzwave/network.py to network.pyc
creating build/bdist.linux-aarch64/egg/EGG-INFO
copying src-api/openzwave.egg-info/PKG-INFO -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-api/openzwave.egg-info/SOURCES.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-api/openzwave.egg-info/dependency_links.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-api/openzwave.egg-info/not-zip-safe -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-api/openzwave.egg-info/requires.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
copying src-api/openzwave.egg-info/top_level.txt -> build/bdist.linux-aarch64/egg/EGG-INFO
writing build/bdist.linux-aarch64/egg/EGG-INFO/native_libs.txt
creating 'dist/openzwave-0.3.1-py2.7.egg' and adding 'build/bdist.linux-aarch64/egg' to it
removing 'build/bdist.linux-aarch64/egg' (and everything under it)
Processing openzwave-0.3.1-py2.7.egg
creating /usr/local/lib/python2.7/dist-packages/openzwave-0.3.1-py2.7.egg
Extracting openzwave-0.3.1-py2.7.egg to /usr/local/lib/python2.7/dist-packages
Adding openzwave 0.3.1 to easy-install.pth file
Installed /usr/local/lib/python2.7/dist-packages/openzwave-0.3.1-py2.7.egg
Processing dependencies for openzwave==0.3.1
Searching for libopenzwave==0.3.1
Best match: libopenzwave 0.3.1
Processing libopenzwave-0.3.1-py2.7-linux-aarch64.egg
libopenzwave 0.3.1 is already the active version in easy-install.pth
Using /usr/local/lib/python2.7/dist-packages/libopenzwave-0.3.1-py2.7-linux-aarch64.egg
Searching for Louie==1.1
Best match: Louie 1.1
Adding Louie 1.1 to easy-install.pth file
Using /usr/lib/python2.7/dist-packages
Searching for six==1.12.0
Best match: six 1.12.0
Adding six 1.12.0 to easy-install.pth file
Using /usr/local/lib/python2.7/dist-packages
Searching for nose==1.3.7
Best match: nose 1.3.7
Adding nose 1.3.7 to easy-install.pth file
Installing nosetests script to /usr/local/bin
Installing nosetests-2.7 script to /usr/local/bin
Using /usr/lib/python2.7/dist-packages
Finished processing dependencies for openzwave==0.3.1
Installation of API finished.
Everything is successfully installed!
C'est donc propre il semblerai..

En santé je suis au vert partout sauf ZWAVE ... !

Bien sur j'ai mis en Debug plusieurs fois mais ce n'est jamais pris en compte malgré les reboot etc...

Avant dernier recours je relance un backup d'avant la MAJ mais bien sur ca n'a pas marché donc j'en vient a mon dernier recours épluchage du forum mais il semblerai qu'il faut faire une nouvelle instal !!!! Surpris je prefere poster sur le forum
Odroid C2
Razberry / RFXCOM / Teleinfo / MyFox HC2 / ESP8266
--
Just Have Fun

i-magin
Actif
Messages : 987
Inscription : 18 août 2015, 10:23
Localisation : Villeurbanne

Re: Impossible de contacter le serveur Z-wave

Message par i-magin » 12 sept. 2019, 11:04

Bonjour
Tu as vérifié que le port clé Z-Wave est toujours renseigné dans la configuration du plugin Z-Wave ?
Jeedom RC V4.0.23
* DIY NUC 6I5SYK (Crucial 16GB Kit (8GBx2) DDR4 2133 MT/s) * Contrôleur Z-Wave AEOTEC GEN5 *
* VMWare ESXi 6.7.0 Update 3 (Build 14320388) * VM Jeedom Debian 9.5 avec 1 CPU/4 Go de mémoire * PHP 7.0.30-0 * Clé USB : SENA UD100

eldoctor62
Actif
Messages : 1089
Inscription : 12 nov. 2014, 15:44

Re: Impossible de contacter le serveur Z-wave

Message par eldoctor62 » 12 sept. 2019, 11:22

Bonjour, c'est sur Auto... J'ai jamais touché en fait :)

Mais bizarrement il semblerait qu'elle n'est pas detecté par jeedom ?
Capture d’écran 2019-09-12 à 11.24.56.png
Capture d’écran 2019-09-12 à 11.24.56.png (105.89 Kio) Consulté 185 fois
En ssh j'ai bien ceci :

Code : Tout sélectionner

root@odroidc2:~# lsusb
Bus 001 Device 007: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 001 Device 006: ID 0658:0200 Sigma Designs, Inc. Aeotec Z-Stick Gen5 (ZW090) - UZB
Bus 001 Device 005: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 Serial (UART) IC
Bus 001 Device 003: ID 2001:f103 D-Link Corp. DUB-H7 7-port USB 2.0 hub
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@odroidc2:~# 
En ssh je vient quand meme de faire un apt update && apt full-upgrade pour tester. J'ai eu 73 MAJ je vais rebooter dans quelques minutes pour voir le comportement
Dernière édition par eldoctor62 le 12 sept. 2019, 11:40, édité 1 fois.
Odroid C2
Razberry / RFXCOM / Teleinfo / MyFox HC2 / ESP8266
--
Just Have Fun

i-magin
Actif
Messages : 987
Inscription : 18 août 2015, 10:23
Localisation : Villeurbanne

Re: Impossible de contacter le serveur Z-wave

Message par i-magin » 12 sept. 2019, 11:38

Le port de ta clé Z-Stick Gen5 ne serait-il pas /dev/ttyACM0 ?
Jeedom RC V4.0.23
* DIY NUC 6I5SYK (Crucial 16GB Kit (8GBx2) DDR4 2133 MT/s) * Contrôleur Z-Wave AEOTEC GEN5 *
* VMWare ESXi 6.7.0 Update 3 (Build 14320388) * VM Jeedom Debian 9.5 avec 1 CPU/4 Go de mémoire * PHP 7.0.30-0 * Clé USB : SENA UD100

eldoctor62
Actif
Messages : 1089
Inscription : 12 nov. 2014, 15:44

Re: Impossible de contacter le serveur Z-wave

Message par eldoctor62 » 12 sept. 2019, 12:06

Je viens de tester mais il semblerai qu'il n'y ai aucun changement :

Code : Tout sélectionner

[2019-09-12 12:00:42][ERROR] : Impossible de lancer le démon openzwave, relancer le démon en debug et vérifiez la log
[2019-09-12 12:05:04][ERROR] : Attention je pense qu'il y a un soucis avec le démon que j'ai relancé plus de 3 fois consecutivement
[2019-09-12 12:05:06][INFO] : Lancement démon openzwave : /usr/bin/python /var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/openzwaved.py  --device /dev/ttyACM0 --loglevel debug --port 8083 --config_folder /var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/config --data_folder /var/www/html/plugins/openzwave/core/class/../../data --callback http://127.0.0.1:80/plugins/openzwave/core/php/jeeZwave.php --apikey VYihp5MjqxyuF8xnwNVtbSSC0EDGbWpeuj4YxUZg8lBQlpHU --suppressRefresh 0 --cycle 0.3 --pid /tmp/jeedom/openzwave/deamon.pid --disabledNodes 60,--,62,61
Traceback (most recent call last):
File "/var/www/html/plugins/openzwave/core/class/../../resources/openzwaved/openzwaved.py", line 67, in <module>
globals.disabled_nodes = [int(disabled_node_id) for disabled_node_id in args.disabledNodes.split(',')]
ValueError: invalid literal for int() with base 10: '--'
[2019-09-12 12:05:21][ERROR] : Erreur sur la fonction deamon_start du plugin : Vous devez attendre au moins 45 secondes entre deux lancements du démon. Dernier lancement : 2019-09-12 12:05:04
Odroid C2
Razberry / RFXCOM / Teleinfo / MyFox HC2 / ESP8266
--
Just Have Fun

Carl
Timide
Messages : 48
Inscription : 14 juil. 2016, 17:58

Re: Impossible de contacter le serveur Z-wave

Message par Carl » 12 sept. 2019, 14:37

J'ai eu le même problème j'ai du faire une restauration J-1 pour retrouver le fonctionnement de mon z-wave.

Avatar de l’utilisateur
PrFalKeN
Actif
Messages : 907
Inscription : 27 nov. 2017, 18:51

Re: Impossible de contacter le serveur Z-wave

Message par PrFalKeN » 12 sept. 2019, 15:04

'Jour

et passer le démon en debug et poster le log debug comme c'est indiqué dans le log que tu as déjà posté ?
Ca pourrait aider....

eldoctor62
Actif
Messages : 1089
Inscription : 12 nov. 2014, 15:44

Re: Impossible de contacter le serveur Z-wave

Message par eldoctor62 » 13 sept. 2019, 12:07

Bah j'aimerais... Je ne fais que ca !!!

Je suis en Debug, MAIS ca ne passe jamais car le demon ne se lance pas :
Capture d’écran 2019-09-13 à 12.06.54.png
Capture d’écran 2019-09-13 à 12.06.54.png (40.23 Kio) Consulté 100 fois
Capture d’écran 2019-09-13 à 12.07.42.png
Capture d’écran 2019-09-13 à 12.07.42.png (62.15 Kio) Consulté 96 fois
Odroid C2
Razberry / RFXCOM / Teleinfo / MyFox HC2 / ESP8266
--
Just Have Fun

eldoctor62
Actif
Messages : 1089
Inscription : 12 nov. 2014, 15:44

Re: Impossible de contacter le serveur Z-wave

Message par eldoctor62 » 13 sept. 2019, 12:51

Hello... Si je restaure un update ca ne change rien meme 6 jours avant...

Je refais une clean instal, Restaure mon backup..., fait donc les MAJ idem... ZWAVE ne fonctionne pas.

Je refais une clean instal, restaure mon backup de la veille des 2 maj zwave / jeedom et zwave nikel.

Conclusion : pour maintenir la stabilité, j'évite la recente MAJ. J'ai ouvert un ticket je verrais bien.
Odroid C2
Razberry / RFXCOM / Teleinfo / MyFox HC2 / ESP8266
--
Just Have Fun

Répondre

Revenir vers « [Plugin Officiel] Z-Wave »

Qui est en ligne ?

Utilisateurs parcourant ce forum : Aucun utilisateur inscrit et 3 invités