Page 1 sur 1

CoolCam Smart Power Plug NAS-WR01ZE issue

Publié : 22 févr. 2018, 19:52
par epedlou
Hi,

I bought a Coolcam Power plug that was associated with jeedom without issues and in the SETUP we could see the following parameters:
Capture_plug_1.PNG
Capture_plug_1.PNG (44.78 Kio) Consulté 241 fois
As you can see it includes parameters for "Power" "Voltage" etc.
I bought a second one and after the inclusion with jeedom if I look into "Setup" I have:
New_Capture_setup.PNG
New_Capture_setup.PNG (37.09 Kio) Consulté 241 fois
As you can see "Power" and "Voltage" parameters are no longer available. My main intention with this plug usage is to control power consumption.

I no longer have the plug that was previously OK. I am not sure if this is an issue with the plug or if some configuration changes can be done to solve this issue.

Do you have any idea how to sort this out?

Thanks in advance
BR

Re: CoolCam Smart Power Plug NAS-WR01ZE issue

Publié : 14 juin 2018, 21:28
par coslau
Hi
I have the same issue... did you find a solution ?